Shuttle XPC Barebone SH97R6
Shuttle XPC Barebone SH97R6
Compra Ya
x

Características técnicas

Especificaciones sujetas a cambio por parte del fabricante.
ChassisBlack aluminium chassis
Front panel: glossy plastic with horizontal line texture
Storage bays: 1 x 5.25" (external), 2 x 3.5" (1x internal, 1x external)
With the optional accessory PHD3 two 2.5" drives
can be installed into one 3.5" bay.
Front doors for I/O ports and storage drives
Kensington Security Slot at the back panel (also called K-Slot
or Kensington lock) as a part of an anti-theft system
Dimensions: 33.2 x 21,6 x 19.8 cm (LWH), 14.2 litres
Weight: 3.5 kg net / 5.0 kg gross
Mainboard / ChipsetShuttle "FH97", Shuttle form factor
proprietary design for XPCs SH97R6
Dimensions: 270 x 195 mm
Chipset: Intel® H97 Chipset
(Intel® DH82H97 PCH, code name "Wildcat Point")
Platform Controller Hub (PCH) as Single-Chip-Solution
Passive chipset cooling with heat sink
The Northbridge is integrated into the processor.
Solid Capacitors for sensitive areas provide excellent
heat resistance for enhanced system durability
BIOSAMI BIOS, SPI Interface, 32 MBit Flash-ROM with SPI interface
Supports PnP, ACPI 3.0, Hardware Monitoring
Supports Unified Extensible Firmware Interface (UEFI)
Supports boot up from external USB flash memory
Power supplyBuilt in 300 Watt mini switching power supply (PC61J)
AC input voltage: supports 100~240V, 50~60 Hz
80 PLUS® Bronze compliant: the PSU provides at least
82/85/82% of efficiency at 20/50/100% of load.
Active PFC circuit (Power Factor Correction)
ATX main power connectors: 2x10 and 2x2 pins
Graphics power connector: 6 pins
Other connectors: 4x SATA, 2x Molex, 1x Floppy
Operation SystemThis system comes without operating system.
It is compatible with Windows 8 / 8.1, Windows 7 und Linux
Processor supportSocket LGA 1150 (H3) supports the fourth generation of
Intel Core i7 / i5 / i3, Pentium and Celeron processors
Maximum supported processor power consumption (TDP) = 95W
Codename "Haswell", 22nm process technology, up to 8 MB of L3 cache
Supports "Haswell Refresh" processors.
Not compatible with older Socket LGA 1155 processors.
Does not support the unlock-function of Intel K-Series processors.
The Processor integrates PCI-Express, memory controller
and the graphics engine on the same die (performance features
depend on processor type)
Processor coolingShuttle I.C.E. (Integrated Cooling Engine)
Advanced I.C.E. Heat-pipe technology with 3 pipes
Temperature controlled 92 mm fan
SilentX cooling and noise reduction technology with Active Airflow
Memory support4 x 240 pin slots
Supports DDR3-1600/1333 SDRAM memory (PC3-12800/10600)
Supports 2+2 Dual Channel mode
Supports max. 8 GB per DIMM, maximum total size of 32 GB
Integrated GraphicsThe features of the integrated Intel HD graphics function
depends on the processor type used.
Supports OpenCL 1.2, DirectX 11.1, OpenGL4.1 and DX extensions,
SH97R6 features three digital video outputs:
- HDMI v1.4 (supports 1080p/60 and 2160p/30)
- 2x DisplayPort v1.2 (supports 1080p/60 and 2160p/60)
Supports displays with 4K Ultra HD resolution at 3840 x 2160
Supports three independent FullHD displays over the integrated graphics
Supports more displays in combination with a discrete graphics card
Supports Blu-ray (BD) playback with HDCP content protection
Supports multi-channel digital audio over the same cable
PCIe Expansion Slots1x PCI-Express x16 v3.0 slot (PEG, for graphics cards only)
1x PCI-Express x4 v2.0 slot
This XPC supports dual-slot (double-width) graphics cards -
in this case the second PCI-Express slot will be occupied.
Graphics power connector: 6 pins
Mini PCIe SlotsThis XPC features two Mini PCI Express expansion slots:
1) half size, supports PCIe 2.0 and USB 2.0, e.g. for WLAN cards
2) full size, supports PCIe 2.0, SATA 3.0 (6 Gbps) and USB 2.0
e.g. for Mini SATA (mSATA) flash memory cards
7.1-channel HD audio7.1 channel High Definition Audio with Realtek ALC892 codec
Analog: line-out (7.1-ch), line-in, microphone, AUX input (onboard)
Digital Audio via HDMI and DisplayPort outputs
Gigabit LANRealtek RTL 8111G Ethernet network controller
PCI Express interface
IEEE 802.3u 1000Base-T compliant
Supports 10 / 100 / 1.000 MBit/s operation
Supports Wake-on-LAN (WOL)
SATA connectors4x Serial ATA, max. 6 Gbps (onboard)
1x External Serial ATA (eSATA), max. 3 Gbps (back panel)
Supports Intel Rapid Storage Technology (RST 12, Raid 0/1/5/10, JBOD)
1x mSATA Mini-Slot for flash memory cards, max. 6 Gbps
Supports Smart Response Technology (SRT, "SSD Caching")
Front Panel connectors and buttonsMicrophone input
Headphone output (line-out)
2x USB 3.0
2x USB 2.0 (1x Quick charge with up to 2A)
Power button
Power indicator (blue LED)
Hard disk drive indicator (yellow LED)
Back Panel connectorsHDMI v1.4
2x DisplayPort v1.2
2x USB 3.0
4x USB 2.0
GigaBit LAN (RJ45)
External Serial ATA (eSATA 3Gb/s)
7.1-ch Audio line-out (2x rear/front, bass/center, surround/back)
Audio Line-in
Clear CMOS button
optional: serial port RS-232 (Accessory: H-RS232)
3x perforations for optional WLAN antennas
Other connectors4x USB 2.0 (two sets with 2x5 pins, one set is occupied)
1x RS232 (2x5 pins) for optional accessory H-RS232
2x fan connectors (4 pins), one connector is occupied
Audio AUX input / Line-in (4 pin)
Low Pin Count header (LPC, 2x 10 pins, 2 mm pitch size)
Digital Audio S/PDIF header (3 pins)
Occupied front connectors: USB 3.0/2.0, audio, power buttons, LEDs
Included AccessoriesMultilanguage XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC)
32/64 bit driver disk
2x Serial ATA cables
Power Cord
Screws
Heatsink Compound
Protector for CPU socket (do not use, if heat-pipe or fan is mounted)
Optional AccessoriesPHD3 - 3.5" to 2.5" adapter
H-RS232 - Backpanel COM port adapter for the RS232 serial interface
WLN-C- Wireless LAN 802.11n module with external antennas
PC63J - 500W power supply, 80 PLUS® Silver
Environmental SpecOperating temperature range: 0~35°C
Relative humidity range: 10~90% (non-condensing)
Certifications / ComplianceEMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI, TÜV
Other: RoHS, ErP 2013 Lot 6, Energy Star 5
ConformityThis device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits