Chassis | Black aluminium chassis Front panel: brushed aluminium Storage bays: 1 x 5.25" (external), 2 x 3.5" (1x internal, 1x external) With the optional accessory PHD3 two 2.5" drives can be installed into one 3.5" bay. Front doors for I/O ports and storage drives Kensington Security Slot at the back panel (also called K-Slot or Kensington lock) as a part of an anti-theft system Dimensions: 33.2 x 21,6 x 19.8 cm (LWH), 14.2 litres Weight: 3.5 kg net / 5.0 kg gross |
Mainboard / Chipset | Shuttle "FH87/FZ87", Shuttle form factor proprietary design for XPCs SH87R6/SZ87R6 Dimensions: 270 x 195 mm Chipset/Southbridge: Intel® Z87 (codename: Lynx Point) Chipset stepping is C2 or higher. Platform Controller Hub (PCH) as Single-Chip-Solution Passive chipset cooling with heat sink The Northbridge is integrated into the processor. Solid Capacitors for sensitive areas provide excellent heat resistance for enhanced system durability |
BIOS | AMI BIOS, SPI Interface, 32 MBit Flash-ROM with SPI interface Supports PnP, ACPI 3.0, Hardware Monitoring Supports Unified Extensible Firmware Interface (UEFI) [3] Supports boot up from external USB flash memory |
Power supply | Built in 500 Watt mini switching power supply AC input voltage: supports 100~240V, 50~60 Hz 80PLUS Bronze compliant: the PSU provides at least 82/85/82% of efficiency at 20/50/100% of load. Active PFC circuit (Power Factor Correction) ATX main power connectors: 2x10 and 2x2 pins Graphics power connector: 6 pins and 8 pins Other connectors: 4x SATA, 2x Molex, 1x Floppy |
Operation System | This system comes without operating system. It is compatible with Windows 8, Windows 7 und Linux |
Processor support | Socket LGA 1150 (H3) supports the fourth generation of Intel Core i7 / i5 / i3 processors Maximum supported processor power consumption (TDP) = 95W Codename "Haswell", 22nm process technology, up to 8 MB of L3 cache Not compatible with older Socket LGA 1155 processors. Support the unlock-function of Intel K-series processors. The Processor integrates PCI-Express, memory controller and the graphics engine on the same die (depends on processor type) Please refer to the support list for detailed processor support information. |
Processor cooling | Shuttle I.C.E. (Integrated Cooling Engine) Advanced I.C.E. Heat-pipe technology with 4 pipes Temperature controlled 92 mm fan SilentX cooling and noise reduction technology with Active Airflow |
Memory support | 4 x 240 pin slots Supports DDR3-1333/1600 SDRAM memory (PC3-10600/12800) Supports 2+2 Dual Channel mode Supports max. 8 GB per DIMM, maximum total size of 32 GB |
Optional: Integrated Graphics | The features of the integrated Intel HD graphics function depends on the processor type used. Supports OpenCL 1.2, DirectX 11.1, OpenGL4.1 and DX extensions. Supports HDMI, max. resolution up to 1920x1200 Supports DVI, max. resolution up to 1920x1200 Supports D-Sub, max. resolution up to 2048x1536 (optional VGA-to-DVI-adapter required) Supports HDCP function through the DVI and HDMI ports Supports Full HD 1080p Blu-ray (BD) playback via DVI and HDMI ports Supports Dual-Independent-Display via HDMI and DVI-I port Supports 4 displays in combination with a discrete graphics card HDMI supports HD-video plus multi-channel digital audio on a single cabl |
PCIe Expansion Slots | 1x PCI-Express x16 v3.0 slot (PEG, for graphics cards only) 1x PCI-Express x1 v2.0 slot This XPC supports dual-slot (double-width) graphics cards - in this case the second PCI-Express slot will be occupied. Graphics power connector: 6 pins and 8 pins |
Mini PCIe Slots | This XPC features two Mini PCI Express expansion slots: 1) half size, supports PCIe 2.0 and USB 2.0, e.g. for WLAN cards 2) full size, supports PCIe 2.0, SATA 3.0 (6 Gbps) and USB 2.0 e.g. for Mini SATA (mSATA) flash memory cards |
7.1-channel HD audio | 7.1 channel High Definition Audio with Realtek ALC888S codec Azalia standard support Analog: line-out (7.1-ch), line-in, microphone, AUX input (onboard) Digital: optical S/PDIF-out (Digital Audio also via HDMI output) |
Dual Gigabit LAN | Dual Realtek RTL 8111E Ethernet network controller with two RJ45 ports PCI Express interface IEEE 802.3u 1000Base-T compliant Supports 10 / 100 / 1.000 MBit/s operation Supports Wake-on-LAN (WOL) |
Drive connectors | 4x Serial ATA rev. 3.0, max. 6 Gbit/s (onboard) 1x External Serial ATA rev. 2.0, max. 3 Gbit/s (back panel) Supports Intel Rapid Storage Technology (RST 12, Raid 0/1/5/10, JBOD) Supports Smart Response Technology (SRT, "SSD Caching") |
Front Panel connectors and buttons | Microphone input Headphone output (line-out) 2x USB 3.0 2x USB 2.0 (1x Quick charge with up to 2A, see 8) Power button Power indicator (LED) Hard disk drive indicator (LED) |
Back Panel connectors | HDMI (supports digital audio) DVI-I (supports analog VGA with optional adapter) 4x USB 2.0 2x USB 3.0 2x GigaBit LAN (RJ45) 7.1-ch Audio line-out (2x rear/front, bass/center, surround/back) Audio Line-in External Serial ATA (eSATA 3Gb/s) Digital Audio: optical S/PDIF output Clear CMOS button optional: serial port RS-232 (Accessory: H-RS232) 3x perforations for optional WLAN antennas |
Other connectors | 4x USB 2.0 (two sets with 2x5 pins, one set is occupied) 1x RS232 (2x5 pins) for optional accessory H-RS232 2x fan connectors (4 pins), one connector is occupied Audio AUX input Low Pin Count header (LPC, 2x 10 pins, 2 mm pitch size) Other occupied connectors: S/PDIF, USB 3.0/2.0, audio, power buttons, LED |
Included Accessories | Multilanguage XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC) 32/64 bit driver disk 2x Serial ATA cables Power Cord Screws Heatsink Compound Protector for CPU socket (do not use, if heat-pipe or fan is mounted) |
Optional Accessories | 3.5" to 2.5" adapter (PHD3) Backpanel COM port adapter for the RS232 serial interface (H-RS232) Wireless LAN 802.11n module with external antennas (WLN-C) |
Environmental Spec | Operating temperature range: 0~35°C Relative humidity range: 10~90% (non-condensing) |
Certifications / Compliance | EMI: FCC, CE, BSMI, C-Tick Safety: ETL, CB, BSMI, TÜV Other: RoHS, ErP 2013 Lot 6, Energy Star 5 |
Conformity | This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines: - EMV-guideline 89/336/EWG electromagnetic tolerance - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits |