Chassis | Slim PC with black chassis made of metal Dimensions: 190 × 165 × 43 mm (LWH) = 1.35-litre Weight: 1.3 kg net and 2.1 kg gross Two holes for Kensington Locks and numerous threaded holes (M3) on both sides of the chassis |
Power Adapter | External 90 W power adapter (fanless) Input: 100~240 V AC, 50/60 Hz Output: 19 V DC, 4.74 A, max. 90 W DC Connector: 5.5/2.5 mm (outer/inner diameter) Remark: The DC-input of the computer supports an external power source with 19V±5%. AC mains cable: 3 pi |
Operating System | This system comes without operating system. It is compatible with Windows 10 and Linux (64-bit) |
Processor support | Processor Socket LGA 1200 Supports Intel Core i9 / i7 / i5 / i3, Pentium Gold and Celeron processors Supports 10th generation Intel Core processors, codenamed "Comet Lake-S" in 14 nm process technology Supports processors with integrated graphics only Max |
Processor cooling | Heatpipe processor cooling with two 60 mm fans on the upper side of the chassis |
Mainboard / Chipset | Mainboard in the Shuttle form factor proprietary design for the XPC DH470 Chipset/Southbridge: Intel® H470 Passive chipset cooling with heat sink The Northbridge is integrated in the processor. Solid Capacitors for sensitive areas provide excellent heat r |
BIOS | AMI BIOS, SPI Interface, 16 MB Flash-EEPROM Supports Hardware Monitoring and watchdog functionality Supports Firmware-TPM (fTPM) v2.0 [11] Supports boot up from external USB flash memory Supports Unified Extensible Firmware Interface (UEFI) Supports power |
Memory support | 2× SO-DIMM slot with 260 pins Supports DDR4-2666/2933 (PC4-21300/23466) SDRAM at 1.2 V Supports Dual Channel mode Supports a maximum of 32 GB per DIMM, maximum total size: 64 GB Supports two unbuffered DIMM modules (no ECC or registered) Note: The memory |
Integrated Graphics | The features of the integrated Intel UHD graphics function depend on the processor type used. Supports DirectX 12, OpenGL 4.5 The PC features three video outputs which support 1080p/60 and 2160p/60: - 1× HDMI v2.0a - 2× DisplayPort v1.2 Supports displays |
Storage bay | 1× 6.35 cm / 2.5" storage bay supports one hard disk or SSD drive with SATA connector Device height: 12.5 mm (max.) |
SATA connectors | 1× Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth With Serial-ATA power connector (onboard) |
M.2-2280M SSD slot | The M.2 2280M slot provides the following interfaces: - PCI-Express Gen. 3.0 X4, supports NVMe - SATA v3.0 (max. 6 Gbps) It supports M.2 cards with a width of 22 mm and a length of 42, 60 or 80 mm (type 2242, 2260, 2280). Supports M.2 SSDs with SATA or PC |
M.2-2230E slot for WLAN cards | Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0 Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230) Supports WLAN extension cards (optional Shuttle accessory: WLN-M) |
Audio | Audio Realtek® ALC 662 5.1 channel High-Definition Audio Two analog audio connectors (3.5mm) on the front panel: 1) 2-channel line-out (head-phones) 2) microphone input Digital multi-channel audio output: by HDMI and DisplayPort |
Gigabit LAN Controller | Dual network with two RJ45 ports Used network chips: 2× Intel i210-AT Ethernet Controller with MAC, PHY and PCIe interface Supports 10 / 100 / 1.000 MBit/s operation Supports WAKE ON LAN (WOL) Supports network boot by Preboot eXecution Environment (PXE) S |
Card Reader | Integrated card reader Supports SD, SDHC and SDXC up to v3.01 memory cards UHS-I interface supports up to 104 MB/s (SDR104) transfer speed Realtek RTS5227S chip with PCIe chipset interface Supports boot up from SD card. |
Front Panel connectors | Microphone input Audio Line-out (headphones) 2x USB 3.2 Gen 2 Type A (red) 1x USB 3.2 Gen 1 Type A (blue) 1x USB 3.2 Gen 1 Type C Power button Power LED (blue) HDD LED (yellow) |
Back Panel connectors | 1× HDMI 2.0a connector 2× DisplayPort 1.2 connector (DP) Optional: 1× D-Sub VGA connector (Accessory PVG01) 2× USB 3.2 Gen 2 Type-A (red) 2× USB 3.2 Gen 1 Type-A (blue) 2× Gigabit LAN (RJ45) 2× RS232 serial port, 9-pin D-Sub (5/12V, 1× RS422/RS485) 1× DC- |
Other onboard connectors | 1× jumper for power-on-after-power-fail (hardware solution) 1× analog VGA graphics output CN6 (2× 10-pin, 1 mm pitch) 2× serial interface (COM) occupied by back panel connectors 1× USB 2.0 (4-pin) for optional accessory WWN03 (LTE kit) 1× fan connector |
Supplied Accessories | Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC) VESA mount for 75/100 mm standard (two metal brackets) Four screws M3 × 5 mm (screws together VESA mount and PC) Four screws M4 × 10 mm (to affix VESA mount on the PC) Four screws M3 × 4 mm (to mo |
Optional Accessories | - PVG01: optional D-Sub VGA video output - WLN-M. WLAN module in M.2-2230 format supports IEEE 802.11ac and Bluetooth 4.0 with two external antennas. - WWN03: LTE adapter kit with antennas, but without LTE card - PS02: Stand for vertical operation - CXP01 |
Environmental Specifications | Operating temperature range: 0~50 °C Relative humidity, non-condensing: 10~90 % |
Certifications / Compliance: | EMI: FCC, CE, BSMI, RCM, VCCI Safety: ETL, CB, BSMI Other: RoHS, Energy Star, ErP |
Conformity | This device is classed as technical information equipment (ITE) in class B and is intended for use in the living room and office. The CE-mark approves the conformity by the EU directives: (1) 2004/108/EC relating to electromagnetic compatibility (EMC), (2 |