Shuttle Android DSA2LS
Shuttle Android DSA2LS
Compra Ya

Características técnicas

Especificaciones sujetas a cambio por parte del fabricante.
ChassisRobust black metal chassis made of 0.8 mm thick steel
Dimensions: 190 x 142 x 35 mm (LWH) = 0,94-litre
Weight: 0.7 kg net, 1.4 kg gross
Hole for Kensington Lock at the side of the chassis
Supplied VESA mount supports 75x75 mm and 100x100 mm VESA standards
Operation SystemAndroid 4.2.2 (Jelly Bean)
Note: no access to Google Play Store
ProcessorFreescale i.MX 6 DualLite (i.MX6DL)
based on the ARM® Cortex™-A9 architecture
2x 1 GHz (Dual Core), 512 KB L2 cache
Integer computing performance: 5000 DMIPS
NEON SIMD media accelerator per Core
Program Flow Trace Macrocell (PTM) per Core
Graphics engineDual 2D/3D Hardware Graphics Accelerators
Support single FullHD 1080p or dual 720p resolution in clone mode
Two video outputs: HDMI (supports digital audio) and D-Sub/VGA
Supported video decoding standards:
MPEG2, H.264, MPEG4/ Xvid DivX H.264, AVI/ Xvid H264 MJPEG, MOV/ H.264
Note: Supported decoding formats may vary according to different media player application.
DRAM Memory1 GB DDR3
Flash memory4 eMMC (embedded Multimedia Card)
~2.48 GB available capacity in delivery state
Ethernet Network (LAN)Gigabit Ethernet via RJ45 connector
Ethernet PHY chip: Atheros AR8033
10/100/1000BASE-T IEEE 802.3 compliant
Support IEEE802.3az (Energy Efficient Ethernet)
AutomatiFront Panel connectorsc MDI/MDIX crossover and polarity correction
Supports Wake-on-LAN (WOL) event detection
Note: Ethernet and WLAN cannot be activated at the same time
Wireless LAN (WLAN)WLAN module: Chicony XW704T, chipset: Realtek RTL8192CU
1 transmit and 1 receive path (1T1R)
20MHz and 40MHz bandwidth transmission
Supports IEEE 802.11 b/g/n
Maximum PHY data rate: up to 150 Mbps
Supports WPA/WPA2 security protocols in accordance to IEEE 802.11i
Note: Ethernet and WLAN cannot be activated at the same time
Button & LED (Front Panel)Power button with LED indicator:
Power button functions:
- Device on: press over 1 second
- Suspend mode / Resume: press in the normal way
- Device off: press over 1 second
- Device force off: press over 10 seconds
LED behaviour:
- Red Static ON: Booting error
- Blue Blinking: System is booting
- Blue Static ON: System is ready
Front Panel connectors1x Mini-USB 2.0 (Mini-B type, device mode)
3x USB 2.0 (A type, host mode) - all ports together max. 500 mA
1 x SD card reader (behind a cover), supports max. 64 GB
Back Panel connectors1 x HDMI 1.4 supports Digital Audio
1 x D-Sub VGA
1 x Audio Line-out
1 x D-Sub RS232 Serial Port
1 x RJ45 Gigabit Ethernet Network
1 x Restore Button
1 x AC power input (3-pin)
1 x Connector for external Wireless LAN antenna
Power SupplyInternal power supply
Input: 100~240V AC, max. 0.3 A, 50-60 Hz
3-pin AC power cord, length: around 1.8 m
Angled Euro Plug (Schuko, Type F) and Cloverleaf (Type C5)
(The type of plug depends on the region of purchase)
Output: 5V, max. 2A, max. 10W
Scope of DeliveryMulti-language user guide
VESA mount for 75/100mm standard (two metal brackets)
Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to fix the VESA mount to the external device)
Power cord (cable length ca. 1.8 m)
WLAN antenna (total length: ca. 107 mm, angled: 85 mm)
Low power consumptionOff mode: 0.19 W
Standby mode: 1.42 W
Idle mode: 4.22 W
Load (AnTuTu v4.4 benchmark): 6.25 W
Environmental SpecificationsOperating temperature range: 0~45 °C
Relative humidity, non-condensing: 10~95%
Conformity/CertificationsCE, FCC, C-TICK, CCC, BSMI, CB, ErP Lot6, R&TTE
Verybox utiliza cookies para recopilar información estadística y mejorar el uso de la Web. Si continúa navegando consideramos que acepta el uso de cookies. OK | Política de cookies