Fanless and silent | Passive heatpipe cooling, no fan noise at all Perfect to be used in noise-sensitive environments Fanless, dust-free and thus virtually maintenance-free |
24/7 nonstop operation | This device is approved for 24/7 permanent operation. Requirements: - Free circulation of air amongst the PC must be guaranteed. - Ventilation holes must be kept clear. - If a hard disk is installed, this must also be approved for permanent operation by its manufacturer. |
IP54 protected | The front panel is dust-protected and protected from splashing of water according to protection class IP54. |
Low power consumption | Power consumption: ca. 15 W (idle mode) When switched off: 0.13 W (S5 mode with EUP=on) (Configuration: 4 GB RAM, 60 GB SSD and Windows 7) |
Chassis | Colour: black or white Dimensions: 391 x 327 x 42 mm (W x H x D) 100mm VESA mount capable Mounting hole for Kensington lock Weight: 3.08 kg net, 4.24 kg gross |
Operating system | This system comes without operating system. It is compatible with: - Windows 7, 8.1, 10 with 64-Bit - Linux 64-Bit |
Touchscreen | Touchscreen function supports fingertip input Resistive 5-wire single-touch technology Stylus for the touchscreen included |
39.6cm display (15.6 | 39.6cm / 15.6" LCD display, ratio: 16:9 wide-screen panel Resolution: 1366x768 = 1.05 Megapixel Backlight unit: High power LED, Luminance: 220 cd/sqm Glass thickness: 0.5 mm |
Processor | Model: Intel Core i3-6100U (ULV) System-on-a-chip architecture (SoC): no chipset required BGA1356 package - directly soldered onto the mainboard Code name: Skylake-U (6th Generation Intel Core) Cores / Threads: 2 / 4 Clock rate: 2.3 GHz L1/L2/L3 Cache: 128 kB / 512 kB / 3072 kB Memory controller: DDR3L-1600 Dual Channel (1.35V) TDP wattage: 15 W maximum Manufacturing process: 14 nm Maximum Tjunction Temperature: 100°C Supports 64-bit, Hyper-Threading, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2 Integrated graphics engine |
Integrated Graphics | Intel HD graphics 520 (Intel HD Gen. 9) Two digital audio/video ports support two independent screens: 1) HDMI 1.4 supports 1920x1080 @ 60Hz or 4096x2304 @ 24Hz 2) VGA / D-Sub analog video GPU clock rate: 300~1000 MHz Execution Units (EU): 24 Supports DirectX 12, OpenGL 4.4 Supports full h264, h265 8/10 bit, VP8/9, VC-1, AVC hardware decoding Supports Quick Sync Video and Clear Video HD technology Supports HD video plus multi-channel digital audio via a single cable Dynamic, shared memory: up to 1.7 GB |
Up to three displays simultaneously | Two video outputs: HDMI v1.4 and D-Sub (VGA) Supports triple display: the integrated display plus two external displays 1) Clone mode: all displays show the same content at 1366x768 resolution 2) Extended mode: all displays show different content, while the external displays run at Full HD resolution (1920x1080) maximum. |
BIOS | AMI BIOS in 8 MByte EEPROM with SPI interface Supports Power fail resume / always on Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states Supports hardware monitoring and watch dog functionality |
Memory | 1 x SO-DIMM slot with 204 pins Supports one module DDR3L-1600 (PC3-12800) at 1.35V Maximum capacity: 16 GB Caution: This mainboard does only support 1.35V DDR3L memory modules. DDR3L has a lower operation voltage compared to DDR3 |
Hard disk drive / SSD | Supports one SATA hard disk or one SATA SSD drive in 6.35cm/2.5" format The SATA 3.0 interface supports up to 600MB/s data transfer speed (6 Gbit/s) Supports one drive with up to 12.5 mm in height |
M.2-2280 Slot | The M.2 2280 BM slot provides the following interfaces: - PCI-Express v3.0 X4 supports NVMe SSDs - SATA v3.0 (max. 6 Gbps) It supports M.2 cards with a width of 22 mm and a length of 42, 60 or 80 mm (type 2242, 2260, 2280). Supports M.2 SSDs with SATA or PCIe interface. |
Card Reader | Integrated card reader supports SD, SDHC and SDXC memory flash cards |
Webcam | Integrated 2.0 Megapixel (1600x1200) HD webcam |
Microphone and speakers | Front panel with integrated Electret Condenser Microphone and 2x 2W speakers |
Integrated Audio | Realtek ALC269 Audio Codec Two analog audio connectors (3.5mm): 1) Line-out (head phones) 2) Microphone input Digital Audio is supported via HDMI. |
Wired Network | Intel i219LM PHY connected to the MAC of the processor Supports 10 / 100 / 1.000 MBit/s operation Supports WAKE ON LAN (WOL) Supports network boot by Preboot eXecution Environment (PXE) |
Wireless Network (WLAN) | WLAN expansion card (M.2- 2230-AE) with two internal antennas Chip: Realtek RTL8821AE Supports Wireless LAN IEEE 802.11b/g/n/ac 1T1R, 2,4 GHz or 5 GHz Max. speed: 150 Mbps (2.4 GHz) or 433 Mbps (5 GHz) Supports Bluetooth 4.0 |
Front LEDs | Power LED (blue) Hard disk LED (orange) |
Connectors left side | Power button 2x USB 2.0 SD card reader Hole with power button Hole with Clear CMOS button |
Connectors bottom side | HDMI 1.4 (supports digital video and digital audio) 2x USB 3.0 2x USB 2.0 Gigabit Network (LAN, RJ45) Audio Line-out /head phone (3.5 mm jack socket) Microphone input (3.5 mm jack socket) DC input for external power adapter (5.5 / 2.5 mm) Perforation for optional TV/3G antenna (diameter: 9 mm) Optional: 2x COM/serial (RJ45), DIO (RJ11) for cash drawer (accessory POS01) |
Connectors rear side | VGA connector (D-Sub 15 pol., analog video) Optional: 2x COM/serial (D-Sub), 1x LPT/parallel (accessory: PCL71 or POS01) |
Connectors onboard | Serial ATA (6 Gbps) Serial ATA power connector 4x USB 2.0 header (three occupied, one free) Fan connector (4 pin) eDP connector (Embedded DisplayPort) - occupied by the display Connector for optional COM/LPT adapter POS01 or PCL71 |
Power adapter | External 65 W power adapter (fanless) Input: 100~240 V AC, 50/60 Hz, max. 1.6 A Output: 19 V DC, max. 3.42 A, max. 65 W DC Connector: 5.5 / 2.5 mm (outer/inner diameter) Note: The X50V5 also supports a 60W power adapter with 12V DC output voltage |
Included Accessories: | Quick Guide Driver DVD External Power Adapter (65W / 19V) Power cord Serial ATA cable for the 2.5" drive Screws |
Optional Accessories: | PCL71: COM / LPT adapter: - 1x Parallel (25p D-Sub) - 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V POS01: COM / LPT adapter: - 1x Parallel (25p D-Sub) - 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V - 2x Serial RS232 (8p RJ45) - 1x DIO/RJ11 connector for cash drawer supports 12 / 24V PF55: Carrying bag |
Environmental criteria | Operating temperature: 0~40°C Humidity: 10~90% |
Certification and Compliance | EMI: CE, FCC, BSMI Safety: CB, BSMI, ETL Other compliances: RoHS, ErP Lot6, Energy Star v5.0 |
Conformity | This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines: - EMV-guideline 89/336/EWG electromagnetic tolerance - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits |